BEESWIFT BB3020 TWO-FILTER HALF-FACE RESPIRATOR WITH A1P2 FILTERS

Name: BEESWIFT BB3020 TWO-FILTER HALF-FACE RESPIRATOR WITH A1P2 FILTERS
Brand: Axion Cotton
SKU: 311500013
Price: 30 EUR
Availability: InStock

SKU:311500013

30,00€

The BBrand BB3020 half-face mask serves to protect the respiratory tract. It is a mask suitable for the application of 2 filters with a screw-in system.

Returns policy

Features

Pre-assembled, ready-to-use mask with A1P2 filters.
Made from hypoallergenic TPE material at the face contact point.
Provides an excellent fit to aid optimal protection.
Low-profile design offers improved vision.
Soft, adjustable straps offer excellent fit.
Work with filters A1, ABEK and P3.
Gas filters can be combined with replacement pre-filters and retainer adapters.
Filters provided for protection against:
- Organic gases and fumes with boiling point > 65c (A).
- Inorganic gases and fumes (B).
- Sulfur dioxide (E).
Ammonia and organic ammonia derivatives (K).
The half-face mask complies with standards EN140:1998
The filters comply with the standards EN14387:2001
Compatible filters that protect from:
- Organic solvent vapors like Toluene and Carbon Tetrachloride.
- Particles of fine toxic dust, water, and oil-based liquids/sprays.

Properties

BRAND	BEESWIFT
SPECIAL CHARACTERISTICS	FFP2 WITH VALVE

Description

The BBrand BB3020 half-face mask serves to protect the respiratory tract. It is a mask suitable for the application of 2 filters with a screw-in system. The half-face mask complies with standards EN140:1998. The filters comply with the standards EN14387:2001.

General information about reusable full and half-face masks:

Full face masks cover the forehead, nose, mouth, and chin. They have a transparent section for vision. Their characteristics are described in the European standard EN136.
Half face masks cover the nose, mouth, and chin and are described in the European standard ΕΝ140.
To wear a full or half-face mask, it must be ensured that the surface in contact with the face is completely sealed. Men should be properly shaved, and any interference from hair, beards, or spectacle frames should be avoided. Otherwise, the expected protection factor will be reduced.
Disposable filters for these masks comply with European standards EN141 and EN14387and ΕΝ143 and are marked with color codes and filtration classes: 1= low capacity, 2=medium capacity, 3=high capacity.
Masks with filters must not be used in environments where the oxygen concentration is less than 17% Vol. Learn more about respiratory protection standards.